Skip to main content

New Homes and Whole-Home Remodels

Residential Construction in Shalimar, Florida

New homes, multifamily construction and remodels, from changes to a single room to a whole house. Serving Destin, Miramar Beach and Santa Rosa Beach.

  • New homes
  • Multifamily construction
  • Room remodels
  • Whole-home renovations

What's Included

What goes into residential construction?

  1. New construction

    Describe the lot, the type of home and any drawings you already have.

  2. Multifamily buildings

    Identify the number of homes involved and which spaces they share.

  3. Kitchen and bath remodels

    List the cabinets, surfaces and fixtures you want to keep or replace.

  4. Whole-home renovation

    Walk through the rooms together so that finishes and transitions make sense across the house.

Timber-framed houses under construction
Timber-framed houses under construction

When You Need It

When do you need residential construction?

If any of this sounds familiar, it's time.

  • 01

    You have a lot and a house plan

    Bring the site address and the current version of the plans.

  • 02

    One room interrupts the rest of the layout

    Point out where a doorway, cabinet run or floor transition gets in the way.

  • 03

    Your cabinets still suit the kitchen

    Discuss refinishing the existing wood before choosing replacements.

  • 04

    A bathroom needs a new layout

    Describe how people use it and what is difficult about the current arrangement.

  • 05

    Several rooms need new floors

    Identify where the new surfaces meet existing tile or plank flooring.

  • 06

    You’re planning more than one home

    Tell Roy about shared areas, repeat layouts and the number of units.

Sound familiar?

Tell Roy where the property is and what needs to change. Include the timing you have in mind.

Why It Matters

Why invest in residential construction?

  • Keep the rooms connected

    Consider adjacent finishes when choosing the scope for a single room.

  • Preserve useful cabinetry

    Refinishing can retain a layout you already like.

  • Make drawings part of the estimate

    Existing plans help identify what still needs a decision.

  • Plan around daily life

    Explain which rooms your household needs to keep using.

  • Compare like scopes

    Separate must-have changes from finishes you might add later.

  • See completed details

    Use the kitchen, bath and flooring photos to discuss the result you want.

How we compare

How is RGM Development different from other general contractors?

What to compare

RGM Development

Other general contractors

  • A direct conversation with Roy Mansour
    Yes
    Ask who will discuss your plans.
  • New builds and remodeling
    Yes
    Ask which types of residential work they take on.
  • Office, retail and mixed-use projects
    Yes
    Confirm experience with your type of space.
  • Exterior repairs and waterproofing
    Yes
    Ask which exterior systems they work on.
  • Cabinet refinishing and interior upgrades
    Yes
    Check which existing finishes they can retain.
  • Local coverage from Shalimar
    Yes
    Confirm that they serve your address.

What makes us different?

Not all general contractors are created equal.

  1. Timber-framed houses under construction

    Experience from framing through finishes

    Roy is building four homes for a local developer. That ground-up work sits alongside RGM’s remodeling experience, so you can discuss both the structure of a new home and the details that make a room work.

  2. Waterfront house exterior, after

    A coastal exterior needs more than paint

    RGM takes on exterior repairs, painting and waterproofing. For a waterfront property, that means discussing what needs protection as well as how you want the finished exterior to look.

  3. Kitchen cabinet renovation, after

    Keep what works in your kitchen

    Cabinet refinishing gives you a way to change the look of a kitchen while keeping cabinetry that suits the room. RGM’s before-and-after photos show the difference a wood finish can make.

General contracting is easy as 1, 2, 3

Our simple three-step process

  1. Submit your estimate request

    Tell Roy where the property is and what you want to build, repair or change. Include your timing and the best way to reach you.

  2. Choose the right plan

    Walk through your priorities with Roy. Discuss the scope, materials and sequence so the plan fits how you use the property.

  3. Make the space your own

    Bring the plan to life, whether that means a kitchen that works for family dinners, more room to grow or an exterior ready for coastal weather.

Your general contractor in Shalimar

Ready to get started?

We’ll show you what your project could look like.

Start the process
RGM Development Group

What Our Clients Say

Don’t just take our word for it.

Frequently Asked Questions

The Most Common Questions

If your question isn't on the list, give us a call. We answer the phone.

Does RGM take on remodeling as well as new construction?

Yes. RGM works on new homes and remodels. The project gallery includes kitchens, bathrooms, flooring and outdoor living spaces.

Does RGM serve Destin, Miramar Beach and Santa Rosa Beach?

Yes. Destin, Miramar Beach and Santa Rosa Beach are RGM’s primary service areas. RGM is based in Shalimar and also considers projects within a 50-mile radius. Include your town and ZIP code so Roy can confirm coverage.

What should I include in an estimate request?

Tell Roy where the property is, what you want to build or change, and when you hope to start. Mention any photos or plans you can share when you discuss the project.

Does a general contractor help clients choose materials and finishes for a construction project?

A general contractor can often help clients choose materials and finishes by discussing project needs, budget, durability, appearance, and availability. The contractor may also coordinate with designers, suppliers, and subcontractors to make sure selections fit the plans and construction requirements. The exact level of support depends on the project scope and contract, so confirm which material-selection services are included before work begins.

Can a general contractor help manage permits and inspections during a construction project?

A general contractor can often help coordinate permits and inspections during a construction project. This may include identifying required permits, working with local building departments, scheduling inspections, and helping address issues that arise. Requirements vary by location and project type, so confirm the contractor’s exact responsibilities before work begins.

What contract options does a general contractor typically offer for construction projects?

General contractors typically offer several construction contract options, including fixed-price, cost-plus, time-and-materials, and guaranteed maximum price agreements. The right choice depends on the project’s plans, budget, materials, schedule, and level of cost certainty needed. Contract terms can vary, so discuss pricing, change orders, payment schedules, timelines, responsibilities, and warranty coverage before work begins.

Does a general contractor provide warranties for completed construction work?

Warranty coverage depends on the contract and the type of construction work performed. A general contractor may provide a workmanship warranty, while materials and equipment may be covered by separate manufacturer warranties. The exact coverage period, exclusions, and process for reporting issues should be clearly listed in the construction agreement before work begins. Ask for these details, along with any warranty documents, before signing.

Can a general contractor provide references for projects similar to mine?

A general contractor can often provide references for projects similar to yours. Ask for recent examples that match your project’s size, building type, budget, location, and level of complexity. You can also request client references, project photos, and details about the contractor’s work, schedule, communication, and handling of changes or delays. Availability may vary, so discuss your project directly to confirm what relevant references are available.

Can a general contractor help coordinate the planning and development stages of a new construction project?

A general contractor can help coordinate the planning and development stages of a new construction project. This may include discussing project goals, reviewing site and design requirements, developing budgets and schedules, coordinating with architects, engineers, subcontractors, and permitting officials, and preparing the project for construction. The exact services depend on the contractor’s role and the project scope, so it is important to confirm responsibilities, fees, timelines, and contract terms during the initial consultation.

Ready to talk about your project?

Tell Roy about the property and the work you’d like priced.